BraunMark semi-custom bench system 

Learn More
Mammoth Post Backless Bench with an Alaskan Yellow Cedar timber seat on steel plate legs
Mammoth Post Backless Bench installed alongside a planting bed in a public plaza

Mammoth Post Backless Bench

FEATURES

  • The Mammoth Post Backless Bench is available in three standard lengths, 70″L, 94″L, and 117″L, at 19.5″D with an 18″ seat height.
  • The seat is built from Alaskan Yellow Cedar 4×4 timbers carried on a steel frame.
  • Alaskan Yellow Cedar is sanded to 120 grit and finished with a penetrating oil with UV protection.
  • Steel is finished with a durable powder coat, or galvanized where maximum corrosion resistance is required.
  • Assembled with stainless steel fasteners.
  • Approximate weights: 131, 160, and 187 lbs.
  • Also available with a backrest as the Mammoth Post Bench.
  • Add the Mammoth Post Picnic Table for a complete picnic ensemble.
  • When specifying, select the length and the powder coat color or galvanized finish.

 

LINKS AND DOWNLOADS

The Mammoth Post Backless Bench from the Mammoth Collection is built from Alaskan Yellow Cedar 4×4 timbers set side by side across a steel frame, so the seat reads as a solid mass of wood rather than a thin slatted plane. Three standard lengths, 70″, 94″, and 117″, measure 19.5″ deep at an 18″ seat height. Open on both sides, it can be approached from either direction, which suits walkways, transit platforms, and the edges of plazas and promenades where a run of benches has to hold a line. Steel frames are powder coated to coordinate with surrounding site elements or galvanized where corrosion resistance matters most. For heavier, monolithic seating in the same cedar, see the Mammoth Beam Backless Bench.

you Might also like

Related products